Share
All Products ➞ Bordo ➞ Taps & Dies ➞ HSS Hand and Machine Taps ➞ HSS Tap Brass
1/2" x 26 Brass Intermediate HSS Tap
| Part Number: | 3060-1/2I |
| Brand: | Bordo |
| Barcode: | 9326518049821 |
| Pack Qty: | 1 |
| Diameter (inch): | 1/2 |
| Drill Diameter (mm): | 11.8 |
| Lead: | Intermediate |
| Overall Length (mm): | 89 |
| Pitch (tpi): | 26 |
About this item:
- 1/2" x 26 Brass Intermediate HSS Tap
- HSS BSB Intermediate Hand and Machine Tap.
- British Standard Brass (BSB or simply "Brass").
- Brass tubing has a uniform wall thickness, irrespective of the tube diameter, therefore any thread cut on, or in, it needs to have the same depth, so 26 TPI is standard on all BSB diameters.
- BSB is often confused with BS Cycle thread, the difference being that brass thread has an angle of 55° whereas Cycle is 60°.
- Intermediate Taps have a lead of four threads and are used in most general purpose applications to cut a thread true to a pre-drilled pilot hole.
- Manufactured from HSS this general purpose tap is designed for use in medium tensile materials and is for hand or general machine use.